 |
I used scrap-booking paper that had a pattern on both sides to make this one to house a little brass Buddha.
|
 |
| I made this one from card stock to frame an ATC. |
Here is how I made the frame for the ATC:
 |
| I cut a piece of card stock down to 5" x 6" |
 |
| I make 4 score lines, 1/4" apart on each side. On the long side I cut the edges flush with the innermost scored line of the short sides. As for the short sides: the innermost 1/4" gets cut flush with the score line of the long side; the next 1/4" gets cut at an angle; the next two 1/4" sections get cut up from the angle, taking 1/4" off. |
 |
| This is what you end up with! Have fun and feel free to contact me with any questions! |
No comments:
Post a Comment